Plain Linear Bearing - FLAC64 4.00" Self-Aligning Crowned, Compensated Simplicity Bearing

Plain Linear Bearing - FLAC64 4.00" Self-Aligning Crowned, Compensated Simplicity BearingPlain linear bearing, self aligning, closed, with a 4" compensated ID (inner diameter) that provides a 0. 0015" running clearance per side on matching round shafts. Encased in a crowned OD cylindrical anodized aluminum shell that realigns when there is a slight misalignment between parallel shafts, this bearing features a bonded Simplicity self lubricating FrelonGOLD bore liner for maintenance free linear, rotational, and oscillating motion in harsh

ISO Metric - Closed - Round Flanged Center Mount with Holes

Optional O-ring and retaining ring grooves for housing retention

Closed shell plain bearing with green anodized aluminum body for round shafts

Crowned self-aligning plain linear bearing with an 80mm JIS Metric inner diameter and a compensated running clearance of 0

this bearing can pivot slightly within a pre-existing housing or machined bore to accommodate angular misalignment between parallel shafts

Bonded liner design resists dirt

square-end-flange w/ a 40mm precision ID

compensated running clearance

Double Plain Linear Bearing of 25mm JIS Metric ID with a Square Flange (end-mounted) and a precision running clearance of 0

The open anodized aluminum shell provides clearance for rail-supported shafting or profiled rails

The crown creates a curved contact surface that lets a compatible self-aligning housing seat the bearing at a slight angle

providing a longer bearing surface for added support