Thermal overload relay,TeSys Deca,12-18A,1NO+1NC,class 10A,screw clamp Circuit Breakers

Thermal overload relay,TeSys Deca,12-18A,1NO+1NC,class 10A,screw clamp Circuit BreakersTeSys LRD thermal overload relay, 18A 690V, thermal setting range 12 18A, tripping class 10A, for protection of 3 phase motors 7. 5kW@400V. Differential device with phase failure (loss). It provides a thermal adjustement dial, a manual automatic reset selector, a test selector for simulation of a tripping, reset and stop buttons, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover

This Harmony RE17R timing relay can be set between 0

It is a 4P circuit breaker with 80A In rated current

For high operating rates until 180 cycles/min and ambient temperature -40/+60çC

AC type protection class and a 30mA earth leakage sensitivity

999MHz Duty 0

_High/Low Temp Alarm_: With the built-in laser

" "Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs)

It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles

The Ue operational voltage is equal or below 375VDC

The Ue operational voltage is 230VAC

The operating temperature is -25çC to 60çC

The ultimate breaking capacity(Icu) is 50kA at 440V